Average Atomic Mass Calculator
CalcTypes Β· Free Chemistry Tools Β· Interactive Worked Examples
How to Calculate Average Atomic Mass from Isotope Abundance
Find an isotope-weighted atomic mass using exact isotope masses, enter percentages or fractions, solve one missing abundance, or solve a two-isotope reverse problem. Explore contribution charts and calculation steps.
Quick answer: Average atomic mass is the sum of each isotope mass multiplied by its fractional abundance. For chlorine, a mixture of 75.76% chlorine-35 and 24.24% chlorine-37 gives a weighted average near 35.45 u (amu); the result depends on the mixture.
Enter your values
Start with a worked example or enter your own chemistry values.
Enter every abundance; they must total 100% (or 1.0).
Average atomic mass = Ξ£(isotope mass in u Γ fractional abundance)
Use measured isotope masses, not rounded integer mass numbers. You may select an element to load NIST representative isotope data, or enter a custom mixture.
Your calculation result
Choose a mode, enter values and select Calculate, or try an example.
Save, print or share this calculation
QR code for this exact calculation
QR code is generated when your calculation is ready.
Anyone with this link or QR code can see the values you entered. No data is sent to a QR service.Educational calculation aid. Check chemistry, input values, measurement uncertainty and units independently before relying on a result.
How to Calculate Average Atomic Mass Step by Step
1. Identify the isotopes and their measured masses
Isotopes of an element have the same number of protons but different numbers of neutrons. The mass number is an integer nucleon count; the isotope mass is an experimentally determined value in unified atomic mass units (u). For example, chlorine-35 has a measured isotope mass close to 34.968852682 u, not precisely 35 u. NIST publishes mass and abundance data useful for representative classroom problems.
2. Convert percentages to fractions
A 75.76% natural abundance becomes the decimal fraction 0.7576. A 24.24% abundance becomes 0.2424. The two fractions total 1.0000, representing the complete mixture. For three isotopes, such as magnesium-24, magnesium-25 and magnesium-26, check that the sum of all abundances still represents 100%. The calculator accepts either percent or fraction inputs, but not an unlabelled mix of the two formats.
3. Multiply each isotope mass by its fraction
The products mβfβ, mβfβ and so on are the isotope contributions. Add the contributions to find the sample’s weighted mean in u. The result is dominated by more abundant isotopes. A simple arithmetic average of the masses gives the wrong result unless each isotope has an equal abundance.
Selects the example, fills the calculator and jumps to the answer.4. Solve missing or inverse abundances
If one abundance is missing and all others in the complete mixture are known, subtract the known total from 100% (or 1.0 in fraction mode). If exactly two isotope masses and the weighted average are known, solve the linear weighted-average equation to calculate both fractions. An average outside the two isotope masses is physically impossible for that mixture. Identical isotope masses cannot determine a unique composition.
Selects the example, fills the calculator and jumps to the answer.5. Understand what the result represents
This calculation describes your specified isotopic mixture. CIAAW standard atomic weights can reflect natural composition variations and may be represented as intervals for some elements. A classroom isotopic composition is not a proof that every terrestrial sample has exactly that average. Report a defensible number of significant figures based on the supplied masses and abundances.
Worked Examples β Try Each Calculation
Each example below has its own button. Select it to populate the correct mode, run the calculation and jump to the result panel. Values are provided for learning and can be edited afterward.
Example 1 β Chlorine isotope average
34.968852682 u at 75.76% and 36.965902602 u at 24.24%. Multiply each mass by its fraction.
Worked answer: Approximately 35.45 u
Selects the example, fills the calculator and jumps to the answer.Example 2 β Boron isotope mixture
10B = 10.01293695 u at 19.9%; 11B = 11.00930536 u at 80.1%.
Worked answer: Approximately 10.81 u
Selects the example, fills the calculator and jumps to the answer.Example 3 β Bromine with nearly equal isotope abundances
79Br = 78.9183376 u at 50.69%, and 81Br = 80.9162897 u at 49.31%.
Worked answer: Approximately 79.90 u
Selects the example, fills the calculator and jumps to the answer.Example 4 β Magnesium has three isotopes
24Mg at 78.99%, 25Mg at 10.00%, 26Mg at 11.01%, using measured masses.
Worked answer: Approximately 24.31 u
Selects the example, fills the calculator and jumps to the answer.Example 5 β Fraction instead of percent
Boron at 0.199 and 0.801 fractional abundances. The input total must equal 1.
Worked answer: Same weighted mean as percent mode
Selects the example, fills the calculator and jumps to the answer.Example 6 β Calculate one missing abundance
Chlorine-35 is 75.76%; enter chlorine-37 abundance as blank.
Worked answer: Missing abundance = 24.24%
Selects the example, fills the calculator and jumps to the answer.Example 7 β Two-isotope reverse problem
Enter both chlorine isotope masses and an illustrative weighted average of 35.453 u.
Worked answer: Approximately 75.76% Β³β΅Cl and 24.24% Β³β·Cl
Selects the example, fills the calculator and jumps to the answer.Example 8 β Find missing abundance among three isotopes
Magnesium-24 is 78.99%, magnesium-25 is 10%; leave magnesium-26 blank.
Worked answer: Missing magnesium-26 = 11.01%
Selects the example, fills the calculator and jumps to the answer.Example 9 β Carbon-12 and carbon-13
12C = 12 u at 98.93%, 13C = 13.00335483507 u at 1.07%.
Worked answer: Approximately 12.011 u
Selects the example, fills the calculator and jumps to the answer.Example 10 β Tin: ten naturally occurring isotopes
Tin (Sn) has ten naturally occurring isotopes represented in the NIST reference table. Load the masses and abundances and calculate their weighted contributions. A simple average of the ten masses would be incorrect because each isotope occurs with a different frequency.
Worked answer: Approximately 118.71 u for the representative mixture; compare with CIAAW standard atomic weight.
Example 11 β Xenon: nine-isotope weighted average
Load xenon (Xe) with nine natural isotope entries. The weighted average depends on each isotope’s fractional abundance rather than the midpoint between its lightest and heaviest isotopes.
Worked answer: Approximately 131.29 u using the NIST reference composition.
Questions People Ask
Open a question for a detailed explanation, then use its interactive example to test the numbers in the calculator.
How do you calculate average atomic mass from isotopes?
Multiply each isotopeβs mass by its fractional abundance and add the results.
Average atomic mass is a weighted average, not a simple average of the isotope masses. Multiply each isotope mass by its fractional abundance and add the results. For chlorine, using 34.968852682 u at 75.76% and 36.965902602 u at 24.24%, the weighted average is close to 35.45 u. An isotope present 75.76% of the time contributes much more to the average than one present 24.24%. This is why an element's average atomic mass is often between two integer mass numbers instead of exactly matching either one.
Selects the example, fills the calculator and jumps to the answer.How do I convert percent abundance to fractional abundance?
Divide each percentage by 100 before multiplying by the isotope mass.
For example, 19.9% becomes 0.199, and 80.1% becomes 0.801. These fractions total 1.000. Both the percentage and decimal-fraction input modes in the CalcTypes tool lead to the same weighted-average calculation when the values are entered correctly. Avoid treating 0.199 as 0.199% when the field is in percentage mode; that would make the total far too small. The calculator checks the total abundance and reports inconsistent input.
Selects the example, fills the calculator and jumps to the answer.Why is average atomic mass not a whole number?
An element can contain multiple isotopes with different neutron counts and therefore different masses. A naturally occurring sample is often a mixture rather than a single isotope.
Even individual isotope masses are not usually integer values in atomic mass units because of nuclear binding energy and the definition of the atomic mass unit. The weighted average of the isotope masses depends on how much of each isotope is present, so values such as roughly 35.45 u for chlorine are expected. The whole-number mass number is a count of protons plus neutrons, not a substitute for the measured isotope mass.
Selects the example, fills the calculator and jumps to the answer.How do I find a missing isotope abundance?
If exactly one isotope abundance is missing and all the others are given for a complete sample, subtract their total from 100%.
For instance, chlorine-35 at 75.76% leaves chlorine-37 at 24.24%. The tool accepts exactly one blank abundance in this mode, calculates the remainder and then uses the completed distribution for the weighted mean. For three or more isotopes, the same subtraction works if only one abundance is missing. If two or more abundances are unknown and only their sum is known, there is not enough information for a unique answer.
Selects the example, fills the calculator and jumps to the answer.Can I find two isotope abundances from average atomic mass?
Yes, for a mixture containing exactly two isotopes with known, distinct masses and a known weighted-average mass.
Let x be the first isotope's fraction and 1 β x be the second. Solving the linear weighted-average equation gives x = (mass 2 β average) / (mass 2 β mass 1). A valid answer must place both fractions between 0 and 1. If the requested average lies outside the two masses, the problem is impossible for such a mixture. If the masses are identical, abundances are not uniquely determined by the average.
Selects the example, fills the calculator and jumps to the answer.What if isotope abundances do not add up to 100%?
For a complete isotope distribution, the percentages must total approximately 100%, or the fractions must total approximately 1.
Small discrepancies can arise when published abundances are rounded; CalcTypes allows a narrow rounding tolerance and explicitly reports the normalization it uses. Larger discrepancies lead to an error instead of a misleading result. If the table covers only a subset of isotopes, a direct normalized average would describe just that subset, not the whole element. Enter the full intended mixture or identify missing data before calculating.
Selects the example, fills the calculator and jumps to the answer.Are isotope mass and mass number the same?
No. The mass number A is an integer count of protons and neutrons in one atomic nucleus, such as 35 for chlorine-35.
The measured isotope mass, such as approximately 34.968852682 u for chlorine-35, accounts for physical mass and binding-energy effects and is not generally an integer. For accurate weighted atomic-mass work, enter measured isotope masses in unified atomic mass units. Integer mass numbers can give a quick classroom estimate, but this tool deliberately allows the precise masses used in reference data.
Selects the example, fills the calculator and jumps to the answer.Why can the standard atomic weight differ from my result?
The CIAAW standard atomic weight describes normal materials on Earth and for some elements is given as an interval because isotopic composition varies naturally.
Your CalcTypes result describes only the precise mixture and abundances you entered. For example, a particular boron or chlorine sample can have isotope fractions differing from the rounded educational examples, and its weighted mean can therefore differ. Do not use the calculator to infer an element's identity or purity from an approximate weighted mean alone. Compare against appropriate reference ranges and measurement uncertainties when the distinction matters.
Selects the example, fills the calculator and jumps to the answer.How do you use an average atomic weight calculator with isotope abundances?
Choose an element to load reference isotopes, or enter each isotopeβs mass and abundance; the calculator returns the abundance-weighted average.
βAverage atomic weightβ is a frequently used classroom name for the isotope-weighted average mass. Select an element to preload representative NIST isotope masses and abundances, or enter your own isotope rows. Convert each percentage to a fraction, multiply by the measured isotope mass in unified atomic mass units, and add the contributions. Do not simply divide the sum of isotope masses by the number of isotopes unless their abundances happen to be equal.
The calculated value describes the entered mixture. Natural isotope ratios can vary; it should be compared with, not confused with, the CIAAW standard atomic-weight value or interval. Try the chlorine preset and inspect each row’s contribution.
Is atomic mass in u the same as amu or daltons?
Yes, in practice: u (unified atomic mass unit), amu and dalton (Da) refer to the same unit in chemistry calculations.
In chemical calculations, u is the accepted unified atomic mass unit symbol, and amu is a traditional term widely used in U.S. classrooms. The dalton (Da) is another name for the same unit of mass. Isotope masses such as 34.968852682 u for chlorine-35 are measured values, not their integer mass numbers. For classroom estimates, a mass number such as 35 can be useful only when the question explicitly permits approximation.
For a scientifically accurate isotope-weighted average, use the provided decimal isotope masses and percentages. Compare the precision of the input data with the number of figures reported in your final answer.
How do you calculate percent abundance from average atomic mass?
For two isotopes, solve xΒ·mβ + (1 β x)Β·mβ = average mass for x, the fractional abundance of the first isotope.
For two isotopes, use two relationships: the abundance fractions must sum to 1 and their mass-weighted contributions must equal the known average atomic mass. If there are more than two isotopes, the problem can still be solved uniquely when enough abundances are known so that exactly two remain unknown. Enter the isotope masses, fill any known abundances, leave exactly two boxes empty, and provide the target average.
If the average lies outside the physically possible interval or the two unknown isotope masses are identical, the calculator reports the inconsistency instead of inventing percentages. You can test a two-isotope chlorine problem and compare the solved percentages with the forward weighted average.
Why do 99.99% isotope abundances produce two slightly different answers?
Textbooks often calculate each listed mass contribution with its stated percentage divided by 100.
If rounded abundances total 99.99%, that gives a slightly different answer than first normalising all the supplied values to sum exactly to 100%. Neither procedure should silently overwrite the student’s numbers. This calculator shows the as-entered textbook calculation as the main result and also displays a normalised alternative when the total differs only by a small permitted rounding amount.
For experimental data, the most appropriate method depends on the lab instructions, significant figures and meaning of the reported abundances. Totals far from 100% are rejected rather than normalised without notice.
Methodology: How This Calculator Works
Average atomic mass is a weighted average: the calculator multiplies each isotopeβs mass by its fractional abundance (percentage Γ· 100) and adds the results. It can also solve for an unknown abundance when there are two isotopes and the average mass is known.
Assumptions and Limitations
Assumptions
- Standard atomic weights (IUPAC/CIAAW conventional values) are used.
- Isotope masses and abundances you enter are accurate and, for a complete sample, total about 100%.
Limitations
- Textbooks may round atomic weights or significant figures differently.
- Calculations do not show whether a reaction happens or is safe.
- For real laboratory work, follow your procedures and safety data sheets.
Sources and scientific references
These references support the underlying definitions and reference data. Interactive example values are illustrative; verify each result and the original publication where necessary.
Important Safety & Accuracy Disclaimer
This calculator, its worked examples and explanatory content are for educational and informational purposes only; they are not validated laboratory procedures, safety advice or professional guidance. Incorrect inputs, chemical identities, material composition, purity, isotope data, measurement uncertainty, units, rounding, assumptions or software errors can produce inaccurate results. Independently verify all calculations, experimental conditions and conclusions before using chemicals, reporting scientific results or making any real-world decision. Never rely on this tool alone for medical or pharmaceutical dosing, hazardous chemistry, industrial production or safety-critical work. Use is at your own risk; CalcTypes provides no warranty of accuracy or suitability and limits liability to the extent permitted by applicable law. See our full website disclaimer.
Disclaimer
Please read before relying on this page. The Average Atomic Mass Calculator weights isotope masses by the abundances you enter. Natural abundances vary slightly by source. Use it for study; your course may round differently.
Laboratory safety. Calculations do not show whether a reaction or preparation is safe.
Your responsibility. Results are estimates for general information and education only, and nothing here is professional advice. You use this page at your own risk; to the fullest extent permitted by law, CalcTypes, its authors and reviewers accept no liability for loss, injury or damage arising from reliance on it. Spotted an error? Use βReport an issueβ or our contact page. Full terms: Disclaimer Β· Terms of use.