Percent Yield Calculator
CalcTypes Β· Free Chemistry Tools Β· Interactive Worked Examples
How to Calculate Percent Yield, Actual Yield and Theoretical Yield
Calculate percent yield, actual product yield or theoretical yield with mass and mole units. Review a percent-yield comparison, the formula used and worked steps. You can test any example directly in the calculator.
Quick answer: Percent yield = (actual yield Γ· theoretical yield) Γ 100, when both values describe the same chemical product in compatible units. A sample giving 8 g actual product from 10 g theoretical product has an 80% yield. Percentage yield is another name for percent yield, widely used in India and the UK.
Enter your values
Start with a worked example or enter your own chemistry values.
Percent yield (%) = (actual Γ· theoretical) Γ 100
All values must describe the same target chemical product. Enter its molar mass only when converting between grams and moles.
Your calculation result
Choose a mode, enter values and select Calculate, or try an example.
Save, print or share this calculation
QR code for this exact calculation
QR code is generated when your calculation is ready.
Anyone with this link or QR code can see the values you entered. No data is sent to a QR service.Educational calculation aid. Check chemistry, input values, measurement uncertainty and units independently before relying on a result.
How to Calculate Percent Yield Step by Step
1. Find theoretical product yield from stoichiometry
Theoretical yield is the maximum amount of a specified product predicted by the balanced chemical equation when the limiting reactant reacts completely according to that model. First balance the reaction, identify the limiting reactant, use its mole ratio to calculate product moles, then convert product moles to grams if the answer requires mass. Our Stoichiometry Calculator and Limiting Reactant Calculator can help with that preliminary task. This percent-yield calculator does not infer a stoichiometric maximum from an arbitrary mass entry.
2. Measure actual yield of the same target product
Actual yield is the product recovered or measured experimentally. Identify the intended product correctly and account for the product form, purity and any residual solvent or moisture. Never compare recovered mass of one product with a theoretical amount of a different chemical species. If one quantity is expressed in mg and the other in g, convert units; if one is in g and the other in mol, provide the target product molar mass.
3. Calculate and interpret the percent yield
With 8.0 g measured product and 10.0 g theoretically possible, divide 8 by 10 to get 0.8, then multiply by 100 to obtain 80%. This percentage is a ratio of product amounts, not a measurement of chemical safety, purity, selectivity or conversion alone. If the numerical yield exceeds 100%, inspect experimental and theoretical assumptions. A result below 100% may reflect incomplete reaction, losses during recovery or competing reactions. Neither outcome identifies its cause by arithmetic alone.
Selects the example, fills the calculator and jumps to the answer.4. Rearrange the equation when the unknown changes
Actual yield = theoretical yield Γ (percent yield/100). Theoretical yield = actual yield/(percent yield/100). The latter rearrangement requires a strictly positive percentage; two zero inputs do not determine a unique theoretical yield. These rearrangements are useful checks but cannot replace a balanced-reaction calculation.
Selects the example, fills the calculator and jumps to the answer.Worked Examples β Try Each Calculation
Each example below has its own button. Select it to populate the correct mode, run the calculation and jump to the result panel. Values are provided for learning and can be edited afterward.
Example 1 β Calculate percent yield from grams
Actual = 8.0 g, theoretical = 10.0 g of the same product. Divide 8 by 10 and multiply by 100.
Worked answer: 80%
Selects the example, fills the calculator and jumps to the answer.Example 2 β Calculate actual yield
Theoretical = 25 g and yield = 72%. Multiply 25 Γ 0.72.
Worked answer: 18 g actual yield
Selects the example, fills the calculator and jumps to the answer.Example 3 β Calculate theoretical yield
Actual = 6.4 g and percent yield = 80%. Divide 6.4 by 0.8.
Worked answer: 8 g theoretical yield
Selects the example, fills the calculator and jumps to the answer.Example 4 β Convert mg to grams
Actual = 750 mg = 0.750 g; theoretical = 1.00 g. Use like units before dividing.
Worked answer: 75% yield
Selects the example, fills the calculator and jumps to the answer.Example 5 β Compare two mole amounts
Actual = 0.40 mol and theoretical = 0.50 mol of the same product.
Worked answer: 80% yield
Selects the example, fills the calculator and jumps to the answer.Example 6 β Mass-to-mole yield
For NaCl, 5.844 g actual is 0.100 mol using 58.44 g/mol; compare with 0.120 mol theoretical.
Worked answer: 83.33% (approximately)
Selects the example, fills the calculator and jumps to the answer.Example 7 β Investigate above 100%
Measured product = 12 g, theoretical = 10 g. The arithmetic is correct, but interpretation needs caution.
Worked answer: 120% (check purity and measurements)
Selects the example, fills the calculator and jumps to the answer.Example 8 β Zero recovered product
Actual = 0 g, theoretical = 12 g. Zero recovered product can produce a zero percent result.
Worked answer: 0% yield
Selects the example, fills the calculator and jumps to the answer.Example 9 β How to calculate percent yield from a reactant mass
In the balanced reaction CuSOβ + Zn β Cu + ZnSOβ, assume CuSOβ is the limiting reactant. Start with 1.274 g CuSOβ and recover 0.392 g copper. The mole ratio is 1:1; the calculator converts the reactant to moles and predicts the theoretical copper mass before calculating yield.
Worked answer: About 77% percentage yield. The precise value depends on the reference molar masses and rounding used.
Questions People Ask
Open a question for a detailed explanation, then use its interactive example to test the numbers in the calculator.
How do you calculate percent yield in chemistry?
Percent yield = (actual yield Γ· theoretical yield) Γ 100.
Percent yield compares the experimentally obtained amount of the specified product with the maximum amount predicted by the reaction calculation. Divide actual yield by theoretical yield and multiply by 100. For example, if a reaction theoretically should produce 10.0 g of the same target product but you isolate 8.0 g, the percent yield is 80%. Both amounts must refer to the same product and use compatible units. The theoretical yield normally comes from a balanced reaction, the limiting reactant and stoichiometry; the percent-yield formula alone cannot determine it. Students should keep the intermediate values unrounded and round the final answer according to the measured data.
Selects the example, fills the calculator and jumps to the answer.What is the difference between actual yield and theoretical yield?
Actual yield is what was physically recovered or measured in an experiment. Theoretical yield is what an ideal, fully completed reaction could produce from the available limiting reactant under the assumed reaction stoichiometry.
Side reactions, incomplete conversion, work-up losses and purity problems can make the measured amount differ from the theoretical amount. In the calculator, you can solve for actual yield when theoretical yield and percent yield are known. The result is a mathematical rearrangement, not a prediction of the chemistry of an untested reaction. Always verify product identification and the original limiting-reactant analysis.
Selects the example, fills the calculator and jumps to the answer.Can percent yield be higher than 100%?
Mathematically yes, but a real result above 100% usually means the product is impure or wet, or there is a measurement or calculation error.
Yes, the calculation can produce a value above 100%, but a properly measured isolated yield of a pure product exceeding the ideal stoichiometric maximum calls for investigation. Wet product, residual solvent, unremoved salts or impurities, mislabelled units, weighing errors and an incorrect theoretical-yield calculation are common explanations. Do not automatically interpret 120% as proof of a reaction that created extra product. The calculator intentionally displays a result above 100% together with a warning so a student can spot and correct the underlying data rather than having the value silently capped.
Selects the example, fills the calculator and jumps to the answer.Is a zero percent yield possible?
A result of 0% is mathematically possible when no target product is recovered, even if the theoretical amount is positive.
It could reflect a failed reaction, an unsuccessful separation, a detection limit or another experimental issue; the arithmetic cannot identify the cause. We allow zero actual yield in the forward percent-yield mode. However, if both actual yield and percent yield are zero, theoretical yield cannot be determined uniquely by rearranging the formula. The tool deliberately rejects that inverse situation rather than suggesting that the theoretical yield must also be zero.
Selects the example, fills the calculator and jumps to the answer.How do I calculate percent yield when amounts are in mg and g?
First convert the experimental and theoretical quantities to the same unit.
Because 1 g equals 1,000 mg, an actual yield of 750 mg equals 0.750 g. If theoretical yield is 1.000 g, the ratio is 0.750/1.000, giving 75%. The calculator converts mass units automatically, including grams, milligrams and kilograms. It also converts mol and mmol when comparing amounts of the same target product. A conversion from mass to moles requires the product's molar mass in g/mol; a unit conversion must never be confused with changing the chemical species.
Selects the example, fills the calculator and jumps to the answer.Can I compare grams and moles directly?
No. Grams measure mass while moles measure amount of substance; comparing their raw numerical values would be dimensionally incorrect.
If the mass and amount both refer to the same target product, they can be converted using that product's molar mass. For example, NaCl has an approximate molar mass of 58.44 g/mol. A mass of 5.844 g corresponds to about 0.100 mol. If the theoretical product amount is 0.120 mol, the yield is roughly 83.33%. Check the precise product form, including hydrate or salt form, before entering its molar mass.
Selects the example, fills the calculator and jumps to the answer.How do I calculate actual yield from percent yield?
Rearrange the equation so actual yield equals theoretical yield multiplied by percent yield divided by 100.
For example, with 25 g theoretically possible and an experimental yield of 72%, the expected recovered mass is 18 g. This is useful when checking lab-report calculations or constructing practice problems. It does not promise that a laboratory procedure will give 18 g; it simply computes the amount consistent with the specified percentage. The same logic applies to molar amounts, provided all quantities refer to the same substance.
Selects the example, fills the calculator and jumps to the answer.How do I calculate theoretical yield from actual yield?
Divide the actual yield by the fractional percent yield.
For 6.4 g actual product at 80% yield, theoretical yield equals 6.4/0.80 = 8 g. The percentage must be positive so the division is defined. A reported theoretical amount produced by this rearrangement is not an independent stoichiometric verification. For real reactions, also calculate the theoretical yield from the balanced equation and the limiting reactant, and check that the two methods agree.
Selects the example, fills the calculator and jumps to the answer.Is percentage yield the same as percent yield in chemistry?
Yes.
The expressions percentage yield and percent yield describe the same ratio of experimentally recovered product to the theoretical amount predicted by stoichiometry, multiplied by 100. In India and the UK, many school and examination resources prefer βpercentage yield,β while American textbooks commonly use βpercent yield.β Neither term changes the calculation. The actual and theoretical amounts must represent the same product, and the units must be compatible.
For instance, a reaction producing 8.0 g from a theoretical 10.0 g has a percentage yield of 80%. Use the worked example to see the calculation, including the division and percentage conversion.
How do you calculate percent yield from the mass of a reactant?
Find the limiting reactant, use its moles and the mole ratio to get the theoretical product mass, then divide your actual yield by it and multiply by 100.
First balance the chemical equation and establish which reactant is limiting. Convert the limiting reactant’s mass to moles using its molar mass, multiply by the product-to-reactant stoichiometric coefficient ratio, and convert the resulting theoretical product moles to mass. Finally divide the measured actual product amount by that theoretical yield and multiply by 100. The new From reactant mass mode performs these steps transparently after you enter the limiting reactant and coefficients.
For example, in CuSOβ + Zn β Cu + ZnSOβ, the molar ratio between CuSOβ and Cu is 1:1. Given 1.274 g CuSOβ and 0.392 g recovered Cu, compare the recovered copper with the predicted copper from 1.274 g reactant.
Why does a percent yield reaction calculator sometimes show more than 100%?
A result above 100% indicates that the recovered product amount exceeds the theoretical amount entered. This is not evidence that the balanced equation has been overcome.
Common explanations include residual solvent, water, salts or other impurities in the recovered sample, incorrect molecular weights, incomplete drying, inconsistent product identities, or measurement errors. Recheck the limiting reagent and the units before accepting the result.
For example, if a student records 12 g product but the correct theoretical yield is 10 g, the arithmetic gives 120%, and the calculator marks this as a result requiring investigation rather than a successful chemical conversion.
Methodology: How This Calculator Works
Percent yield = (actual yield Γ· theoretical yield) Γ 100. Both yields must be in the same unit; the calculator converts mg, g and kg, or moles, before dividing. It can also work backwards to find actual or theoretical yield from a known percent yield.
Assumptions and Limitations
Assumptions
- Standard atomic weights (IUPAC/CIAAW conventional values) are used.
- Formulas and equations are entered correctly, with element symbols capitalised properly.
- Reactions go to completion as written unless the page says otherwise.
Limitations
- Textbooks may round atomic weights or significant figures differently.
- Calculations do not show whether a reaction happens or is safe.
- For real laboratory work, follow your procedures and safety data sheets.
Sources and scientific references
These references support the underlying definitions and reference data. Interactive example values are illustrative; verify each result and the original publication where necessary.
Important Safety & Accuracy Disclaimer
This calculator, its worked examples and explanatory content are for educational and informational purposes only; they are not validated laboratory procedures, safety advice or professional guidance. Incorrect inputs, chemical identities, material composition, purity, isotope data, measurement uncertainty, units, rounding, assumptions or software errors can produce inaccurate results. Independently verify all calculations, experimental conditions and conclusions before using chemicals, reporting scientific results or making any real-world decision. Never rely on this tool alone for medical or pharmaceutical dosing, hazardous chemistry, industrial production or safety-critical work. Use is at your own risk; CalcTypes provides no warranty of accuracy or suitability and limits liability to the extent permitted by applicable law. See our full website disclaimer.
Disclaimer
Please read before relying on this page. The Percent Yield Calculator compares your actual and theoretical yields. It relies on a correctly balanced equation and correct limiting reactant. It is a study tool and does not judge laboratory technique or safety.
Laboratory safety. Calculations do not show whether a reaction or preparation is safe.
Your responsibility. Results are estimates for general information and education only, and nothing here is professional advice. You use this page at your own risk; to the fullest extent permitted by law, CalcTypes, its authors and reviewers accept no liability for loss, injury or damage arising from reliance on it. Spotted an error? Use βReport an issueβ or our contact page. Full terms: Disclaimer Β· Terms of use.